Are you an AT&T internet subscriber who’s looking to extend the Wi-Fi range in large houses, establishments with cameras all around, and office setups that require consistent internet connectivity across floors? Your existing setup must be a bit underwhelming to handle it and that is why it is important to surf through the AT&T compatible WiFi extenders.
Wi-Fi extenders are relatively affordable. And some might even offer excellent routing and relaying capabilities. However, if you are looking to pick something for standard and even high-speed plans, it is good to rely on specific, including the maximum number of devices that can be connected, the number of ports, coverage, overall speeds, app support, if any, and more.
But then, it isn’t that easy to find the best AT&T WiFi extender, despite them coming cheap. You often end up with something that offers subpar dual-band connectivity, limited indicators, and a setup that is insanely hard to decipher. But I have made sure that these pain points do not come across as blockers, and you can still find the right ATT extender that you desired all this while.
In the next few sections, I shall enlist and review 7 of the best ATT network extenders in the retail space that can be used to increase the efficacy of your existing internet setup.
7 Best Wi-Fi Extenders for AT&T in 2022
I have connected with loyal AT&T internet service users to finally come up with a list of extenders that they use or even recommend. Most importantly, each of the ATT smart WiFi extenders caters to a specific set of requirements and fits into every budget.
So let us get started right away.
1. Best for ATT Fiber: TP-Link RE650
- Wireless Standard: Wi-Fi 5 (802.11ac)
- Speeds: 800Mbps + 1733Mbps
- Range: Up to 3000 Sq Ft
- Number of Devices Support: 30+
- App Support: Yes
If you are on the Fiber optic internet plan, the TP-Link RE650 is the best possible WiFi extender for ATT Fiber that you should consider. Also, purchasing this device makes sense to office owners and home users who need to cover a lot of areas without compromising on speeds.
Why is it suitable for AT&T?
Coming to the speeds, this extender is good enough for helping you reach 2.4GHz and 5GHz band speeds of 800Mbps and 1733Mbps, respectively. Not just that, you can even use this extender to cover 3000 Sq Ft of area, without compromising on throughput. Finally, the MU-MIMO support allows you to connect over 30 devices to the extender at once.
It’s also one of the better extenders for gaming, so if you indulge in cloud gaming, streaming, or any other intensive activities, you will benefit from this device.
Design & Connectivity
As far as design and dimensions are concerned, this 1-pound extender measures 3.4 x 6.4 x 1.6 inches. Plus, it features a vertical layout that is perfectly ventilated and comes equipped with four high-gain antennas.
There are three front-facing LEDs in play followed by a solitary, Gigabit-level ethernet port for connecting to the router. Plus, this device also boasts Beamforming support, Intelligent indication, and a dedicated access point mode to help you use the internet setup across rooms.
Setup & other Features
Setting up this device cannot get any easier with the Tether application to rely on. With the application in play, you can manage the network attributes remotely over an Android or iOS device. Also, when it comes to the connections, the RE650 supports both wired and wireless interactions with the router.
Conclusion
While there isn’t a lot to look for in ATT range extenders, the TP-Link RE650 sets a benchmark by offering multi-Gig LAN speeds, Beamforming support, and even MU-MIMO functionality rolled in one. And the expansive specs sheet sets it apart from other products on the list.
- Light and portable
- Near and far band speeds are exceptional
- MU-MIMO support
- High-speed port
- Beamforming support prioritizes bandwidth-intensive devices
- Still heats up a bit
- Not enough Ethernet ports
2. Best ATT Mesh Extender: Netgear EAX20
- Wireless Standard: Wi-Fi 6 (801.11ax)
- Speeds: 600Mbps + 1200Mbps
- Range: Up to 1500 Sq Ft
- Number of Devices Support: 20+
- App Support: Yes
If you rely more on speeds and internet quality over the budget, the Netgear EAX20 is easily the best WiFi extender for ATT internet service. Also, the EAX20 is also one of the better-looking products on the list.
Why is it suitable for AT&T?
For starters, Netgear promises max cumulative speeds of up to 1800Mbps. While you can easily get 600Mbps of far band speed, the 5GHz throughput extends well over 1Gbps. Also, this extender can easily cover 1500 Sq Ft of the equivalent area without breaking a sweat. Plus, if you are looking for the max number of connections that Netgear can help establish, the EAX20 peaks at 20.
Design & Connectivity
As far as aesthetics are concerned, the EAX20 sports a black-colored chassis. The well-ventilated form factor translates to 11.4 x 8.3 x 4.5 inches in terms of dimensions. The 2.15-pound extender makes way for 4 Gig Ethernet ports, allowing you to establish direct connections with the bandwidth-intensive devices. Plus, there are over 6 LEDs to help to monitor the connections in person.
Also, when it comes to connectivity, this extender boasts Wi-Fi 6 standard and the Smart Roaming functionality to help you connect with mesh routers. There are 4 wireless streams in play courtesy of two integrated antennas, which minimize signal loss and help you cut through network congestion.
Setup & other Features
Setting up the EAX20 and managing the network performance is possible with the Nighthawk application in play. Plus, there are standard security specs like WPA2 support in play to help you connect to identifiable devices in one go.
Conclusion
Overall, the Netgear EAX20 is one of the fastest AT&T smart Wi-Fi extenders in play. Also, its 4 Gig ethernet setup makes it a better bet as compared to other picks on the list.
- 4 high-speed ethernet ports
- Exceptional 5GHz speeds
- Meant for bandwidth-intensive devices
- Excellent consistency
- The range could have been better
- Heavy
3. Best for Portability: D-Link DAP-1820-US
- Wireless Standard: Wi-Fi 5 (802.11ac)
- Speeds: 300Mbps + 1733Mbps
- Range: Up to 1800 Sq Ft
- Number of Devices Support: 20+
- App Support: Yes
Not many wireless extenders allow you to carry them in pockets while moving elsewhere. However, the D-Link DAP-1820-US changes perspective by coming across as one of the most portable options in play. Plus, it works with almost every AT&T internet plan, starting from the 10Mbps DSL packages to the Gig level fiber internet packages.
Why is it suitable for AT&T?
First of all, it is the speed that makes a compelling case with DAP-1820-US capable of reaching near the band and far band speeds of up to 300Mbps and 1733Mbps, respectively. And these attributes make it good enough for smaller ranges, which is validated by the existing coverage of 1800 Sq Ft.
As far as simultaneous connections and limits are concerned, this extender allows you to pair close to 20 devices without compromising on speeds.
Design & Connectivity
This device weighs less than 0.60 pounds and measures 5.5 x 3.54 x 2.75 inches. Barring the slimness and portability, it is the standalone Gig ethernet port and the plug-and-play setup that stand out. The front panel houses 4 LED indicators, including the smart signal identifier to help you detect high-speed connections.
Plus, there are two internal antennas in play followed by a moderately well-ventilated structure to make operations easier for you.
Setup & other Features
You can configure and use this AT&T WiFi extender to the best of its abilities by connecting it with the D-Link application. And once you connect the same, it is possible to use the EXO range extender to work with any mesh setup and digital assistants.
Conclusion
The D-Link DAP-1820-US offers excellent value for money as an AT&T WiFi range extender. However, it is the ultra-light form factor that makes it a standout performer.
- Reliable app
- Ultra-fast 5GHz connections
- Comes with a smart signal indicator
- Two built-in antennas
- Subpar far band speeds
4. Best Value for Money: Netgear EX6120
- Wireless Standard: Wi-Fi 5 (802.11ac)
- Speeds: 300Mbps + 877Mbps
- Range: Up to 1500 Sq Ft
- Number of Devices Support: 25+
- App Support: No
The Netgear EX6120 is the most reliable ATT extender setup on the list, provided you plan on using AT&T’s mid-level internet plans. And the plug-and-play nature of this product makes it an instant hit among small home and office owners.
Why is it suitable for AT&T?
Coming to the speeds, the EX6120 promises 2.4GHz speeds of up to 300Mbps followed by a 5GHz throughput of almost 900Mbps. The high-speed wireless networking capability is matched by an exceptional range of 1500 Sq Ft, which precedes the affordable pricing. And finally, this is one of the finest Wi-Fi extenders for home use that lets you connect to 25 devices at once.
Design & Connectivity
The squarish, plug-and-play design measures 2.64 x 1.54 x 2.17 inches. On top of that, this light extender weighs less than 0.3 pounds and even comes loaded with a standard ethernet port with 100Mbps of peak throughput. And this is why I would recommend this for AT&T internet plans that offer 50Mbps of peak speeds.
Setup & other Features
The EX6120 doesn’t work with a dedicated application, but you can still configure it via the web interface. Plus, the WPS security setup makes it easier for you to connect known devices to the extender.
Conclusion
The Netgear EX6120 might not be a future-proof extender, but it manages to boost ATT WiFi signal and brings excellent speeds, higher throughput, and four LEDs for a sub $50 price point.
- Excellent near band speeds
- Two built-in antennas
- Works with almost every Netgear router
- Can connect over 25 devices at once
- Ethernet port doesn’t support Gig level connections
- 2.4GHz band speeds aren’t as consistent as 5GHz
5. Best for AT&T U-Verse: TP-Link TL-WR902AC
If you haven’t invested in your own router for AT&T U-Verse, the ISP-rented device might have coverage limitarions. If so, this extender from TP-Link should suffice your needs, until you upgrade to a better internet setup in future.
- Wireless Standard: Wi-Fi 5 (802.11ac)
- Speeds: 300Mbps + 433Mbps
- Range: Up to 1200 Sq Ft
- Number of Devices Support:15+
- App Support: Yes
The TP-Link TL-WR902AC is one of the more reliable ATT Uverse range extender in play, especially if you want something for a small house running a standard 10Mbps to 50Mbps AT&T internet plan. And what makes it special is the ability to work across modes.
Why is it suitable for AT&T?
When it comes to speeds, the TL-WR902AC promises cumulative throughput of almost 750Mbps. This translates into near and far band speeds of up to 300Mbps and 433Mbps. Also, despite the affordable price point, TP-Link lets you connect over 15 devices at once and assume networking coverage of almost 1200 Sq Ft.
Design & Connectivity
The TL-WR902AC is seriously one of the lightest products around at 0.50 pounds. And on top of that, the dimensions read as 2.64 x 2.91 x 0.87 inches. Despite being a range extender, it makes way for one USB port and a standard 100Mbps Ethernet port.
Connectivity-wise, this device sports the Wi-Fi AC standard and comes equipped with a one-touch button to use the same as an extender, hotspot, or eve access point, if and when needed.
Setup & other Features
You can fine-tune and configure this extender using the interactive TP-Link application. And the USB port allows you to passively charge tablets and smartphones when needed.
Conclusion
The TP-Link TL-WR902AC as an AT&T Uverse WiFi extender, comes equipped with several functional traits and a pretty exhaustive set of ports and LEDs. And the specs sheet, especially for the budget pricing, helps it outpace other affordable picks on the list.
- Reliable USB port
- High-speed near band
- Exceptional design
- Can function in multiple modes
- No Gigabit support
6. Best from AT&T: AT&T Air 4920
- Wireless Standard: 802.11a
- Speeds: Up to 1Gbps
- Range: Up to 600 Sq Ft
- Number of Devices Support: 10+
- App Support: Yes
Despite the relatively higher price point, the AT&T Air 4920 comes across as one of the preferred range extenders on the list. And the best thing about this product is the compatibility and an open mind towards most Fiber Optic internet connections.
Why is it suitable for AT&T?
The Air 4920 from AT&T is good enough to help you reach max wireless speeds of up to 1000Mbps. However, the 802.11a standard ensures that it is a good bet only for the near band or the 5GHz band. Plus, connections established using the said band can get max speeds of up to 50Mbps, depending on which AT&T plan you are using.
This extender also exhibits a moderate wireless coverage range of almost 600 Sq Ft and lets you connect close to 10 devices at once.
Design & Connectivity
The Air 4920 manages to put together a white-colored, vertical form factor with adequate heat dissipating vents. Plus, it weighs a manageable 0.94 pounds and measures 1.63 x 4.27 x 3.94 inches. Coming to the wired setup, this device features two Gig ethernet for working alongside bandwidth-intensive devices. Not to mention the indicative lights that glow brighter than most.
Setup & other Features
You can use your standard AT&T app for configuring this extender as preferred. Also, despite the 802.1a wireless band, it works rather swimmingly with most Wireless AC routers.
Conclusion
The AT&T Air 4920 is one of the more reliable range extenders that you can consider purchasing for AT&T internet plans. And the in-house flavor and FiOS compatibility make it run past other products on the list.
- Compatible with Fiber optic plans
- Light and portable
- High near band speeds
- Minimal heating
- Connections aren’t always consistent
7. Best Budget Option: TP-Link TL-WA855RE
- Wireless Standard: Wi-Fi 4 (802.11n)
- Speeds: 300Mbps
- Range: Up to 800 Sq Ft
- Number of Devices Support:15+
- App Support: Yes
Yes, you can get a range extender with only 15 bucks by your side. And TP-Link N300 ensures that there are no quality compromises as well. Not to mention that this device is the best pick for someone who looks to connect standard smart devices to the internet without sparing a lot of bandwidth for any of them.
Why is it suitable for AT&T?
As far as speeds are concerned, the N300 from TP-Link is functional across the 2.4GHz band. With this extender in play, you can assume max far band speeds of up to 300Mbps, provided you have the right AT&T internet plan by your side.
Also, you get access to an overall coverage area of 800 Sq Ft with this device, which also lets 15+ devices to enjoy the perks of internet connectivity.
Design & Connectivity
This universally compatible, plug-and-play extender allows you to enjoy the benefits of portability. Coming to the aesthetics, the white-colored device weighs less than 0.50 pounds and measures 3.15 x 3.06 x 3.04 inches. And there are two protruding antennas and a fast ethernet port that further the productivity quotient.
Setup & other Features
You can manage this extender with the TP-Link application. However, the process is self-explanatory and doesn’t require a lot of brainstorming.
Conclusion
The TP-Link N300 is one of the few 2.4GHz-only extenders on the list, which wins it over others when affordability is concerned.
- Light
- Ultrafast far band speeds
- Plug-and-Play setup
- Fast Ethernet port
- No 5GHz support
Frequently Asked Questions
Most wireless extenders work with AT&T internet plans provided they come with at least one Ethernet port and dual-band wireless standards. However, it is important to pick one depending on the internet plan and router you are using.
Yes, you can boost your AT&T Wi-Fi by pairing a range extender with the same. But then, to boost wireless connection over a wider area, it is important to pick an extender with higher speed limits, Beamforming support, and excellent coverage.
Yes, there are several Netgear wireless extenders that work with AT&T fiber or Fios internet plans. You only need to ensure that the extender is compatible with the gateway devices, which are used by the Fiber optic internet plans.
The extender that comes equipped with Wi-Fi 6 standard, multiple ethernet ports, and even app support can be considered the best or rather perfect for AT&T internet plans.
Verdict
While there are several reliable range extenders on the list for AT&T internet plans, selecting only one can be tricky at times. And that is exactly why I have prepared a sub-list of sorts, depending on highly-specific use-cases.
- Opt for the Netgear EAX20 if you are already using a Wi-Fi 6 router and want to keep those speeds and throughputs intact.
- The TP-Link RE650 is a reliable WiFi extender compatible with AT&T Fiber. So, if you want something just for the massive coverage and excellent band-independent speeds, you can definitely consider getting it.
- If you’re on hunt for an AT&T WiFi extender setup for your home or office premises on a budget, I would recommend the Netgear EX6120 over everything else.
And while each of these picks is good enough, you can skim through the entire list all over again and pick something that is more aligned to your requirements, budget, and the type of internet plan in play.
Hand-picked Articles to Read: